Integration Engineer / Systems Integrator Job Description
Physical Security
Designs and commissions security systems that have to work with each other and with the rest of the building. Ties access control, video, intrusion and visitor management together, integrates directory and identity sources, sizes servers and storage, and lays out the network the system rides on. Writes and executes the cutover plan for a system that cannot be down, then commissions, documents and hands over something the owner can actually operate.
What this seat pays
Federal figures: BLS Occupational Employment and Wage Statistics, May 2025, national, SOC 17-3023. The range is the 10th to 90th percentile and the median is $78,190. It is not adjusted for experience or region, and it is not a My Trade Talent band.
Pay, location and the date prepared are blank in the Word version on purpose. They depend on your market and your margins, and a template that guesses at them is worse than one that leaves them to you. The figure above is here so the guess is at least anchored.
The seat
| Reports to | Director of Engineering or Technical Services Manager |
| Direct reports | None (technically directs installation technicians on assigned projects) |
| FLSA status | Typically exempt — confirm with counsel |
| Trade | Physical Security |
| Pay band | $49,510 to $115,700 — BLS 10th to 90th percentile |
Where the role goes next. Integration engineers move to solutions architect, engineering manager, or to the manufacturer side.
Essential duties (15)
- Surveys sites and existing systems, documents what is in place — panel types, firmware, card formats, camera models, switch capacity — and writes the gap list that the design has to close.
- Designs camera coverage with lens and pixel-density calculations, then sizes bitrate, storage and retention to the contracted number of days and builds the RAID and server configuration that supports it.
- Specifies and configures the network the system rides on: VLANs, IP addressing schemes, switch port configuration, PoE budget, QoS, multicast where the VMS needs it, and the firewall rules between security and corporate networks.
- Configures access control from the ground up: controllers and downstream boards, reader and OSDP addressing, card formats and facility codes, door behavior, anti-passback, interlocks, time schedules, access levels and partitions.
- Integrates identity sources so cardholders stop being hand-keyed: directory sync with Active Directory or an HR system, automated provisioning and deprovisioning, and field mapping that matches the client data.
- Builds the integrations between systems — video to access control, intrusion to video, visitor management to cardholder records, elevator destination dispatch, intercom and mass notification — and tests each event and action end to end.
- Hardens the deployment: certificates, firmware and patch baselines, removal of default credentials, role-based operator permissions, logging and backup jobs, and documents the hardening so the client security team can review it.
- Writes the cutover plan for live systems: the migration order, the cardholder database conversion, the fallback position, who holds the doors open or posts a guard, and the hour-by-hour sequence for a system that cannot be down during business hours.
- Executes cutovers on nights and weekends, migrates databases, converts credentials, and verifies every door, camera and alarm point before leaving the old system behind.
- Commissions systems point by point against a written test script, records the result for each point, and resolves failures rather than deferring them into the punch list.
- Trains client operators and administrators on their configured system, not a generic feature tour, and leaves job aids for the tasks they will perform weekly.
- Produces the turnover documentation: as-built drawings, IP and device schedules, configuration backups, integration maps, operator guides and the O and M package, delivered before final billing.
- Supports the field crew during installation, answers layout and termination questions, and inspects infrastructure before configuration starts so bad cabling is caught early.
- Handles escalated service tickets on commissioned systems, performs root cause analysis, and feeds recurring causes back into the standard design.
- Tracks and reports engineering and commissioning hours against the sold hours, flags scope changes for a change order, and keeps project documentation current in the company systems.
Qualifications
- Five or more years designing, configuring and commissioning enterprise access control and video systems, including at least one full enterprise cutover
- Working command of IP networking at the level of a CCNA: VLANs, routing basics, subnetting, DNS and DHCP, PoE budgeting, and the ability to read a switch configuration
- Hands-on administration of at least one major VMS and one major access control platform, including server, database and client components
- Windows Server and SQL Server fundamentals: services, permissions, backups, database restore and basic performance troubleshooting
- Able to produce and read design documents — riser diagrams, device schedules, point-to-point wiring and network topology drawings
- Valid driver license, insurable motor vehicle record, and willingness to work nights and weekends for cutovers and travel to client sites
- Passes the criminal background check and drug screen that security and regulated clients require for system administrator access
- Able to access equipment rooms, work in racks, climb a ladder and lift up to 40 pounds
- Manufacturer-level certifications on the platforms the company sells, such as LenelS2, Genetec, Software House, Avigilon, Milestone or Verkada
- Network or security certification such as CCNA, Network Plus, Security Plus or CISSP
- Scripting or API integration experience — PowerShell, Python, REST or SDK work against a VMS or access control platform
- Experience in a regulated vertical: healthcare, higher education, airports, utilities under NERC CIP, or cannabis or pharmaceutical facilities
- Virtualization and storage experience with VMware or Hyper-V and SAN or NAS platforms
- Experience writing commissioning test scripts and running formal owner acceptance testing
- Two-year or four-year technical degree in electronics, networking or information systems
The line between these two columns is the one that costs you candidates. Everything in the preferred column that gets written into a posting as a requirement removes people who could do the job, and in a trade with a shortage that is a self-inflicted wound.
Credentials, and who verifies them
| Credential | Status | Verify with |
|---|---|---|
| Manufacturer platform certification for the primary VMS and access control lines | Required | Manufacturer partner portal transcript, reviewed annually by the engineering manager |
| Networking certification such as CCNA or Network Plus | Preferred | Certification provider verification site, certificate on file |
| State low-voltage, alarm or electronic security license or company license registration | Where the state requires it | State licensing board lookup, with the registration tracked by HR |
| Driver license with insurable motor vehicle record | Required | HR, through the company insurance carrier MVR check |
| Security clearance, site badging or vendor credentialing required by specific client accounts | Where the state requires it | The client or credentialing service of record, tracked per account by the project manager |
| OSHA 10-hour construction training | Preferred | Training provider card verified by the safety manager |
Verify before an offer rather than after. A credential taken on trust at offer is the most expensive line on this page. We track physical security licensing in 39 states; which of them applies depends on where the work is, not where the company is.
Physical demands
| Activity | Frequency |
|---|---|
| Working at a workstation with sustained keyboard, mouse and multi-monitor use | Constant (over 2/3 of shift) |
| Close vision for configuration screens, video image review and drawing markup | Constant (over 2/3 of shift) |
| Walking and standing during site surveys, commissioning walks and door testing | Frequent (1/3 to 2/3 of shift) |
| Kneeling, crouching and bending to work in equipment racks, IDF closets and under consoles | Frequent (1/3 to 2/3 of shift) |
| Driving between client sites, data centers and the office | Frequent (1/3 to 2/3 of shift) |
| Extended or overnight hours during cutovers and acceptance testing | Occasional (under 1/3 of shift) |
| Reaching above shoulder height to rack equipment and reach upper patch fields | Occasional (under 1/3 of shift) |
| Lifting and carrying up to 40 pounds (servers, UPS units, workstations, test gear) | Occasional (under 1/3 of shift) |
| Climbing ladders to verify camera placement, aiming or ceiling device locations | Occasional (under 1/3 of shift) |
| Working in cold, loud server rooms and in unconditioned construction space | Occasional (under 1/3 of shift) |
| Working above ceilings or in crawlspaces to trace existing cabling | Rarely |
| Wearing a filtering facepiece respirator in dusty construction or attic space | Rarely |
This is the section a reasonable accommodation decision actually turns on, which is why it is role specific rather than copied across a trade. An estimator sits and walks sites; a screed operator stands beside hot asphalt all day.
Work environment
Split between an office or home workstation for design and configuration and client sites for survey, commissioning and cutover. Site work happens in server rooms, electrical and IDF closets, security operations centers and active construction areas, with noise, cold, dust and shared ladder access. Cutovers run at night, on weekends and during facility shutdowns. Regional driving is routine and overnight travel occurs on larger projects; occupied healthcare and education sites add badging and escort requirements.
Tools and equipment
The company provides a laptop with the platform software and design tools, licenses, test credentials, a network tester and cable certifier, a monitor setup, phone and either a vehicle or mileage reimbursement. The engineer is expected to own basic hand tools and a small termination kit for commissioning fixes and to maintain their own certification currency.
How performance is measured
| Measure | What it captures |
|---|---|
| Open punch items at system acceptance | Number of items still open when the client signs acceptance on a system this engineer commissioned |
| Cutover downtime against the promised window | Actual time doors, recording or alarm monitoring were out of service compared to the window committed in the cutover plan |
| Turnover documentation delivered on time | As-builts, device and IP schedules, configuration backups and O and M package delivered before final billing |
| Configuration-caused callbacks after acceptance | Post-acceptance service visits traced to configuration or design rather than hardware failure |
| Retention and performance as designed | Measured recording retention and system response verified against the contracted days and the design bitrate |
| Engineering hours against sold hours | Design and commissioning hours billed compared to the hours sold on the project |
| Escalated ticket resolution time | Time from escalation to root cause and closure on tickets assigned to this engineer |
These are the same measures the annual review for this role is built on, so the document you hire against and the document you rate against are measuring one thing.
Reading a resume for this seat
What separates a strong Integration Engineer / Systems Integrator from a plausible one, on paper and in the first ten minutes of a call:
- Thinks in systems and interfaces rather than devices
- Has done an identity or directory integration and can describe what broke
- Can size storage and bandwidth for a camera count and retention requirement
Screen for it: 3 questions and what a strong answer contains
A job description tells you what you need. These tell you whether the person in front of you has it. Each one comes with what a strong answer contains, because an interviewer who does not know that is persuaded by fluency, which is exactly what the question was supposed to see past.
How do you size recording storage for a two hundred camera system at thirty days?
What a strong answer containsBuilds it from the actual variables rather than a rule of thumb: per-camera bitrate at the resolution, frame rate and codec in use, how much is continuous versus event recording, the scene complexity that drives variable bitrate, the retention period, and whether redundancy or failover storage doubles it. Allows headroom and states the assumptions. Knows a system sized on an average bitrate will run out in the first busy week.
Follow up with: What makes real bitrate exceed the calculated one?
Walk me through integrating access control with an enterprise directory.
What a strong answer containsTreats it as an identity project, not a cable: which system is authoritative for identity, what triggers provisioning and, more importantly, de-provisioning, which attributes map to access levels, how groups drive permissions, and what happens when the link is down. Works with the client's identity team rather than around them. Says the leaver process is the point of the integration and the part most implementations get wrong.
Follow up with: What happens to someone's badge the day the directory disables their account?
How do you cut over a live access control system without leaving doors unsecured?
What a strong answer containsPlans it door by door with a fallback for each: the old system stays live until each door is proven, the hardware is swapped in a window with a guard or a mechanical key as the interim, and credentials are loaded and tested before the swap rather than after. Does a pilot group of doors first. Has a documented rollback. Tells the client's security team the sequence so they know what is unprotected and when.
Follow up with: What is your rollback if a door will not come up on the new system?
The mistake this seat invites
Hiring a field technician into a design seat. The integration role is architecture and commissioning, and the failure mode is a system that passes device-by-device and fails as a whole.
How long this takes to fill
We publish no physical security median of our own yet, so this is the all-trades figure: My Trade Talent's median commercial trades hire took 21 days across 94 searches closed in 2026 year to date, counted as calendar days from our first contact with the candidate to the hire.
Worth writing on the requisition before you post it. The cost of the vacancy runs from the day the seat empties, not from the day you start looking, and the calculator will put a number on it for your billing rate.
Questions employers ask about this role
What does an Integration Engineer / Systems Integrator do?
Designs and commissions security systems that have to work with each other and with the rest of the building. Ties access control, video, intrusion and visitor management together, integrates directory and identity sources, sizes servers and storage, and lays out the network the system rides on. Writes and executes the cutover plan for a system that cannot be down, then commissions, documents and hands over something the owner can actually operate. The full description below lists 15 essential duties in trade terms, with physical demands and frequencies.
What qualifications does an Integration Engineer / Systems Integrator need?
8 requirements are written as non-negotiable for this seat. The first 3: Five or more years designing, configuring and commissioning enterprise access control and video systems, including at least one full enterprise cutover; Working command of IP networking at the level of a CCNA: VLANs, routing basics, subnetting, DNS and DHCP, PoE budgeting, and the ability to read a switch configuration; Hands-on administration of at least one major VMS and one major access control platform, including server, database and client components. A further 7 qualifications are preferred rather than required, which is the distinction that decides whether a good candidate gets screened out by your own posting.
What credentials should I verify before making an offer to an Integration Engineer / Systems Integrator?
4 credentials on this role are either required outright or required where the state requires it: Manufacturer platform certification for the primary VMS and access control lines, State low-voltage, Driver license with insurable motor vehicle record and Security clearance. Each one has a named place to verify it in the table below. Verify before the offer rather than after; a credential taken on trust at offer is the most expensive line in a job description.
Is an Integration Engineer / Systems Integrator exempt or non-exempt?
Typically exempt — confirm with counsel. FLSA status turns on the duties actually performed rather than the job title, and the duties for this seat are listed below so a classification decision has something to rest on. We are not lawyers and the note here is a starting point for counsel, not a determination.
What should an Integration Engineer / Systems Integrator be paid?
$49,510 to $115,700. Federal figures: BLS Occupational Employment and Wage Statistics, May 2025, national, SOC 17-3023. The range is the 10th to 90th percentile and the median is $78,190. It is not adjusted for experience or region, and it is not a My Trade Talent band.
How long does it take to hire an Integration Engineer / Systems Integrator?
We publish no physical security median of our own yet, so this is the all-trades figure: My Trade Talent's median commercial trades hire took 21 days across 94 searches closed in 2026 year to date, counted as calendar days from our first contact with the candidate to the hire.
What is the most common hiring mistake in this seat?
Hiring a field technician into a design seat. The integration role is architecture and commissioning, and the failure mode is a system that passes device-by-device and fails as a whole.
One time
Where should we send it?
Tell us who you are once and every document on this site downloads for you from then on, with no form in the way. We are a recruiting firm: someone may call about the roles you are hiring for.