Skip to main content
Annual review

HVAC Controls Technician (BAS / Niagara) Performance Review Template

HVAC & Mechanical

5 weighted sections, 26 criteria, on a scale with written anchors. The criteria are things a manager can observe on a job rather than adjectives about a person, which is the difference between a review somebody can prepare for and one they can only receive.

5weighted sections
26observable criteria
1 to 5anchored scale, every point written out
Take this away as a Word document The same instrument with the scoring columns, a computed overall score with bands, development goals and a sign-off block. The first download asks for your name, company, work email and phone; after that every document here downloads without a form.
Download .docx

The scale

RatingWhat it means
1Does not meet. Specific, repeated and known to the person.
2Below the seat. Needs supervision the role is not supposed to need.
3Meets the seat. This is the standard, not the consolation.
4Above the seat. Others are learning from how they do it.
5Rare. Changes how the company does the work.

A 3 is the standard the seat was hired against, not a disappointment. Managers who treat 3 as a failing grade produce reviews where everyone is a 4, and a scale where everyone scores the same measures nothing.

How the weighted score works

Each section rating is multiplied by that section's weight; the five results are added and divided by 100. Worked through with this role's own weightings, for an illustrative HVAC Controls Technician (BAS / Niagara) who is strong on the trade itself, standard on output and safety, and below the seat on communication:

SectionWeightExample ratingWeighted
A. Technical skill and execution30%41.20
B. Productivity and measured results20%30.60
C. Safety and compliance20%30.60
D. Communication and customer handling15%20.30
E. Reliability, teamwork and development15%30.45
Overall100% 3.15

3.15 on a scale where 3.00 is the seat performed to standard. The total is the least interesting number in that table. A 2 in one section can sit inside a total that reads as unremarkable, which is exactly why the section scores go on the form and the conversation happens section by section rather than about an average. The ratings above are an illustration, not a finding about anyone.

A. Technical skill and execution 30%

CriterionWhat good looks like
Programming to the engineer's sequenceLogic matches the written sequence of operations line by line, and deviations were raised in an RFI rather than decided in the field.
Graphics and front end usabilityAt the training handover the owner's building engineer found a unit, read live values and changed a setpoint without help.
Integration workThird party devices over BACnet or Modbus came online with correct addressing and mapped points, with no unresolved comm fault at closeout.
Wiring and panel workmanshipTerminations are tight, labeled and match the as-built; another technician traced a point from drawing to device without calling.
Troubleshooting on existing systemsDiagnosed comm loss, failed devices and tuning problems to root cause on the first visit on most service calls this year.
Loop tuning and override hygieneTrend logs show valves and dampers holding setpoint without hunting, and no manual override remained on any site signed off this year.

B. Productivity and measured results 20%

CriterionWhat good looks like
Checkout throughputPoints verified per day met the rate planned for the job, tracked on the checkout sheet.
Hours against estimateProgramming and commissioning hours finished at or under estimate on the majority of projects this year.
Functional test pass rateMost functional test items passed on the first run with the commissioning agent, and failures were corrected before leaving the site.
Callback hoursWarranty callbacks attributable to this technician's programming stayed under the agreed hour threshold for the year.
Documentation delivered on timeAs-builts, point lists, addressing schedules and station backups were delivered at substantial completion, not chased weeks later.

C. Safety and compliance 20%

CriterionWhat good looks like
Electrical safetyUsed the correct meter category, PPE and lockout before opening a panel or working near a VFD; no arc flash incident or near miss this year.
Lift and ladder useDocumented pre-use lift inspections and correct ladder selection on every ceiling access task; no observed violation.
Functional testing safeguardsNotified affected staff and locked out equipment before forcing outputs or running failure scenarios, with the notification on record.
Site and owner complianceFollowed infection control, badging and after-hours access rules on occupied healthcare, lab and secure sites with no escalation.
Credential and data handlingEPA and platform credentials kept current, and site logins, licenses and backups stored where company policy requires.

D. Communication and customer handling 15%

CriterionWhat good looks like
RFIs and design questionsWrites an RFI with the drawing reference and a proposed answer when a sequence is ambiguous rather than guessing or stalling the job.
Owner trainingDelivered documented training with a sign-in sheet, and the owner's questions in the first 90 days were few and simple.
Working with the commissioning agentArrived at every scheduled functional test prepared, with the system in the state the script required.
Status reportingGave the controls manager an accurate percent complete and a named blocker each week, so schedule slips were never a surprise.
Conduct in occupied buildingsNo complaint from an owner, tenant or facility staff about access, noise or housekeeping this year.

E. Reliability, teamwork and development 15%

CriterionWhat good looks like
Night and weekend availabilityTook the after-hours test windows the projects required, agreed in advance, and arrived on time for them.
Time and cost reportingLabor recorded daily to the correct project and cost code, with out-of-scope work flagged the same day.
Sharing site knowledgeKeeps shared site records current, so another technician took over an account this year without a handover call.
Laptop, software and tool careSoftware and licenses kept current, laptop backed up, and no test equipment lost or damaged.
Skill developmentAdvanced a credential or platform skill this year, such as Niagara 4 certification or a new vendor integration, and used it on a named job.

What this seat is measured on day to day

MeasureWhat it captures
Point-to-point checkout completion on the first passHow many points verify without a return trip
Functional test items failed during commissioningLogic and wiring errors the commissioning agent finds against the sequence
Warranty and callback hours on systems the technician programmedHunting loops, nuisance alarms and overrides left behind after handover
Controls labor hours against estimate by projectWhether programming and checkout hold the hours the job was sold at
As-built documentation and station backups delivered at closeoutWhether the next technician can pick the site up cold
Nuisance alarm volume on handed-over sitesAlarm classes and limits set so the owner is not ignoring the front end
First-visit resolution on BAS service callsTroubleshooting depth on systems the technician did not build

The same measures the job description for this role is written against, so the document you hire against and the document you rate against are measuring one thing.

Where this person goes next

Controls technicians move to commissioning agent, controls project manager, or independent integrator - the last of which is why they are hard to keep.

The review is the natural place for this conversation and the wrong place to have it for the first time. Someone hearing about the next seat in the same meeting as their rating hears it as consolation. Say it in advance, then use the review to say how far along they are.

The pay conversation

$75,000 to $110,000 My Trade Talent band

My Trade Talent mid-experience band, built from our own engagement history. Experience and region move it; the salary calculator applies both.

A review that produces a number and no pay decision is a review the employee will discount next year. One that produces a pay decision made in the same half hour is usually a decision made on the last thing discussed. Know where the person sits in the band before the meeting, and treat the rating as evidence for a decision you take afterwards.

Nothing here sets pay. What a rating is worth depends on your margins, your bands and your state, and those are yours.

What it costs if this one leaves

My Trade Talent's median HVAC & mechanical hire took 17 days across 34 searches closed in 2026 year to date, counted as calendar days from our first contact with the candidate to the hire.

Worth knowing before the meeting rather than after it. The question a retention decision actually turns on is not whether a raise is deserved but what the seat costs empty for that long, and the calculator will put a figure on it for your billing rate.

Before you use it

Move the weightings to match how your business makes money, and move them before the review rather than after you have seen the scores. The split here is a starting point, not a judgement about your company.

Against every criterion, write the job, the date or the customer that evidences it. A criterion with nothing written beside it has not been met, however well the person is getting on, because you are about to make a decision and an impression is not evidence.

What follows from the result is yours. Pay, promotion and a development plan depend on your margins, your bands and your state, and nothing here sets them.

Questions employers ask about reviewing this role

How do you score an annual review for an HVAC Controls Technician (BAS / Niagara)?

5 sections, weighted to 30%, 20%, 20%, 15%, 15% in that order, each rated 1 to 5 against written anchors. Multiply each section rating by its weight, add the five results and divide by 100; the worked example on this page does it in full. A 3.00 is the seat performed to the standard it was hired against.

What should a rating of 3 mean?

Meets the seat. It is the standard, not the consolation. Managers who treat 3 as a failing grade produce reviews where everyone is a 4, and a scale where everyone scores the same measures nothing and defends nothing if the decision is ever questioned.

How many criteria does this review cover?

26 across 5 sections, all of them things a manager can observe on a job rather than adjectives about a person. Each one has what good looks like written out beside it, which is the difference between a review somebody can prepare for and one they can only receive.

Should the review set pay?

Not by itself, and nothing here does. The instrument tells you how the work was performed against the seat. What follows - a raise, a promotion, a development plan or none of them - depends on your margins, your bands and your state. For reference, the band for this role is $75,000 to $110,000.

What do I do with a 2 in one section?

Name the job, the date or the customer that evidences it, say what meeting the seat would look like instead, and put a date on when you will look again. A 2 with no evidence beside it is an impression, and an impression is not something you can ask someone to improve. A 2 that sits inside an acceptable overall total is also the most common thing a single summary number hides, which is why the section scores go on the form.

Can I change the weightings?

Yes, and you should if they do not match how your business makes money. Change them before the review rather than after you have seen the scores, and change them for the seat rather than the person. The split here is a starting point.

What is the next step up from HVAC Controls Technician (BAS / Niagara)?

Controls technicians move to commissioning agent, controls project manager, or independent integrator - the last of which is why they are hard to keep.

What does it cost if an HVAC Controls Technician (BAS / Niagara) leaves?

My Trade Talent's median HVAC & mechanical hire took 17 days across 34 searches closed in 2026 year to date, counted as calendar days from our first contact with the candidate to the hire. That is the refill clock; the cost of the vacancy runs alongside it from the day the seat empties.

Trade Talk A monthly hiring brief for commercial trades employers

What changed in your trade this month, and what to do about it.

One email a month, and only one. We write a separate issue for every trade we recruit in, so you get yours - not a round-up with your trade buried in paragraph nine. Every issue is written for the person actually doing the hiring.

  • Where wages moved in your trade, by market, and what that does to your next offer
  • How long roles like yours are taking to fill, and where it is getting worse
  • Interview and screening tactics that are landing candidates this month
  • What contractors competing for the same people are doing differently

Built on federal wage data, our own closed searches, and what we hear on the desk every week. Written for employers, not candidates. No pitch, no filler, one click to leave.

Pick your trade. That is the one issue you get, once a month.

One email a month. Your trade and your address, nothing else - we do not sell either, and you can unsubscribe from the bottom of any issue. Read this month's issue for your trade first →