Skip to main content
Annual review

Insulation Worker, Floor/Ceiling/Wall Performance Review Template

Insulation

5 weighted sections, 27 criteria, on a scale with written anchors. The criteria are things a manager can observe on a job rather than adjectives about a person, which is the difference between a review somebody can prepare for and one they can only receive.

5weighted sections
27observable criteria
1 to 5anchored scale, every point written out
Take this away as a Word document The same instrument with the scoring columns, a computed overall score with bands, development goals and a sign-off block. The first download asks for your name, company, work email and phone; after that every document here downloads without a form.
Download .docx

The scale

RatingWhat it means
1Does not meet. Specific, repeated and known to the person.
2Below the seat. Needs supervision the role is not supposed to need.
3Meets the seat. This is the standard, not the consolation.
4Above the seat. Others are learning from how they do it.
5Rare. Changes how the company does the work.

A 3 is the standard the seat was hired against, not a disappointment. Managers who treat 3 as a failing grade produce reviews where everyone is a 4, and a scale where everyone scores the same measures nothing.

How the weighted score works

Each section rating is multiplied by that section's weight; the five results are added and divided by 100. Worked through with this role's own weightings, for an illustrative Insulation Worker, Floor/Ceiling/Wall who is strong on the trade itself, standard on output and safety, and below the seat on communication:

SectionWeightExample ratingWeighted
A. Technical skill and execution30%41.20
B. Productivity and measured results20%30.60
C. Safety and compliance20%30.60
D. Communication and customer handling15%20.30
E. Reliability, teamwork and development15%30.45
Overall100% 3.15

3.15 on a scale where 3.00 is the seat performed to standard. The total is the least interesting number in that table. A 2 in one section can sit inside a total that reads as unremarkable, which is exactly why the section scores go on the form and the conversation happens section by section rather than about an average. The ratings above are an illustration, not a finding about anyone.

A. Technical skill and execution 30%

CriterionWhat good looks like
Batt installation qualityInspected walls show full-width, full-depth batt cut to length and split around wiring and boxes, with no compression behind services on the areas reviewed
Blown and dense-pack workAttic depth markers, bag counts and density on the jobs this year matched the coverage chart and the specified R-value
Rigid board and continuous insulation detailingBoard joints, fastener pattern and taping at exterior walls and parapets were installed per the detail and passed inspection
Spray foam applicationLifts were within the allowed thickness at the correct substrate temperature with the ignition barrier installed, and no section required removal for off-ratio or over-thick foam
Air sealing and fire-stoppingPlates, penetrations and rated assemblies were sealed with the specified or listed system and documented where documentation was required
Acoustic assembliesSound-rated walls were insulated tight to the deck per the detail with no missed cavity found at inspection

B. Productivity and measured results 20%

CriterionWhat good looks like
Output against the planned rateHit the planned square footage or unit count per day on the buildings assigned this period
Hours against estimateFinished assigned areas within the budgeted crew hours, or flagged the overrun before spending it
Material yield and foam set yieldMaterial and foam consumption stayed within the allowance on the jobs reviewed
Re-inspection and rework tripsNumber of return trips for correction stayed at or below the crew average
Readiness for the next tradeAreas were turned over clean and complete so drywall could start on the scheduled date

C. Safety and compliance 20%

CriterionWhat good looks like
Respiratory and chemical protectionWore the fitted respirator, suit, gloves and eye protection the product required, including supplied air for spray work, with no observation to the contrary
Spray area control and reentryKept unprotected workers out of the spray zone, posted the area and enforced reentry times, with no exposure complaint this year
Fall protection and access equipmentUsed the correct ladder, scaffold or lift and covered or avoided floor openings, with no improvised access observed
Rig and equipment conditionPerformed and recorded daily checks on the blowing machine and spray rig and reported faults rather than running through them
Code and listing complianceVapor retarder orientation, ignition barriers and fire-stopping listings were correct on inspected work, with no code correction notice
Incident and near-miss reportingReported every injury, near miss and property damage the same day

D. Communication and customer handling 15%

CriterionWhat good looks like
Working with the inspector or raterWalked assemblies with the inspector, understood the callouts and corrected them the same visit where possible
Coordination with other tradesConfirmed that electrical, plumbing and mechanical rough-in was complete and signed off before insulating, with examples from this period
Reporting field conditionsTold the foreman about missing blocking, wet framing, unsealed penetrations and drawing conflicts before covering them
Protecting other trades workMasked and protected finishes and equipment before spraying, with no damage claim this year
Daily reporting qualityProduction and material reports are specific enough by building and area for the foreman to bill and forecast from

E. Reliability, teamwork and development 15%

CriterionWhat good looks like
Attendance and start timeOn site, geared up and working at the scheduled start, with absences called in per policy
Care of equipment and materialHoses, guns and machines cleaned and stored properly, material kept dry and covered, and nothing lost or ruined through neglect
Direction of helpersTaught a helper a specific task such as attic prep or board fastening, and that person now performs it without supervision
Skill growthAdded a verifiable capability this year — spray rig operation, fire-stopping systems or a lift card — and used it on a job
Crew flexibilityTook assigned crew moves, overtime and weather-driven schedule changes without disrupting the work

What this seat is measured on day to day

MeasureWhat it captures
Installation grade on inspected assembliesShare of inspected assemblies meeting the Grade I or project-specified installation standard without correction
Energy code and rater inspection pass rateInsulation inspections passed on the first visit without a re-inspection trip
Installed R-value and coverage verifiedAttic depth, bag count and board thickness verified against the specified R-value and coverage chart
Square footage or units completed per crew dayProduction against the planned rate for the assembly type and building
Spray foam yield per setBoard feet achieved per set compared to the product yield, including waste and off-ratio loss
Callbacks for gaps, compression or missed cavitiesReturn trips caused by installation defects after an area was called complete
Material and waste accountabilityMaterial consumed and scrapped against the takeoff, with bags and board counted at the end of each area

The same measures the job description for this role is written against, so the document you hire against and the document you rate against are measuring one thing.

Where this person goes next

Building insulators move to lead and foreman, and spray foam certification raises the work available.

The review is the natural place for this conversation and the wrong place to have it for the first time. Someone hearing about the next seat in the same meeting as their rating hears it as consolation. Say it in advance, then use the review to say how far along they are.

The pay conversation

$37,030 to $78,190 BLS 10th to 90th percentile

Federal figures: BLS Occupational Employment and Wage Statistics, May 2025, national, SOC 47-2131. The range is the 10th to 90th percentile and the median is $49,120. It is not adjusted for experience or region, and it is not a My Trade Talent band.

A review that produces a number and no pay decision is a review the employee will discount next year. One that produces a pay decision made in the same half hour is usually a decision made on the last thing discussed. Know where the person sits in the band before the meeting, and treat the rating as evidence for a decision you take afterwards.

Nothing here sets pay. What a rating is worth depends on your margins, your bands and your state, and those are yours.

What it costs if this one leaves

We publish no insulation median of our own yet, so this is the all-trades figure: My Trade Talent's median commercial trades hire took 21 days across 94 searches closed in 2026 year to date, counted as calendar days from our first contact with the candidate to the hire.

Worth knowing before the meeting rather than after it. The question a retention decision actually turns on is not whether a raise is deserved but what the seat costs empty for that long, and the calculator will put a figure on it for your billing rate.

Before you use it

Move the weightings to match how your business makes money, and move them before the review rather than after you have seen the scores. The split here is a starting point, not a judgement about your company.

Against every criterion, write the job, the date or the customer that evidences it. A criterion with nothing written beside it has not been met, however well the person is getting on, because you are about to make a decision and an impression is not evidence.

What follows from the result is yours. Pay, promotion and a development plan depend on your margins, your bands and your state, and nothing here sets them.

Questions employers ask about reviewing this role

How do you score an annual review for an Insulation Worker, Floor/Ceiling/Wall?

5 sections, weighted to 30%, 20%, 20%, 15%, 15% in that order, each rated 1 to 5 against written anchors. Multiply each section rating by its weight, add the five results and divide by 100; the worked example on this page does it in full. A 3.00 is the seat performed to the standard it was hired against.

What should a rating of 3 mean?

Meets the seat. It is the standard, not the consolation. Managers who treat 3 as a failing grade produce reviews where everyone is a 4, and a scale where everyone scores the same measures nothing and defends nothing if the decision is ever questioned.

How many criteria does this review cover?

27 across 5 sections, all of them things a manager can observe on a job rather than adjectives about a person. Each one has what good looks like written out beside it, which is the difference between a review somebody can prepare for and one they can only receive.

Should the review set pay?

Not by itself, and nothing here does. The instrument tells you how the work was performed against the seat. What follows - a raise, a promotion, a development plan or none of them - depends on your margins, your bands and your state. For reference, the band for this role is $37,030 to $78,190.

What do I do with a 2 in one section?

Name the job, the date or the customer that evidences it, say what meeting the seat would look like instead, and put a date on when you will look again. A 2 with no evidence beside it is an impression, and an impression is not something you can ask someone to improve. A 2 that sits inside an acceptable overall total is also the most common thing a single summary number hides, which is why the section scores go on the form.

Can I change the weightings?

Yes, and you should if they do not match how your business makes money. Change them before the review rather than after you have seen the scores, and change them for the seat rather than the person. The split here is a starting point.

What is the next step up from Insulation Worker, Floor/Ceiling/Wall?

Building insulators move to lead and foreman, and spray foam certification raises the work available.

What does it cost if an Insulation Worker, Floor/Ceiling/Wall leaves?

We publish no insulation median of our own yet, so this is the all-trades figure: My Trade Talent's median commercial trades hire took 21 days across 94 searches closed in 2026 year to date, counted as calendar days from our first contact with the candidate to the hire. That is the refill clock; the cost of the vacancy runs alongside it from the day the seat empties.

Trade Talk A monthly hiring brief for commercial trades employers

What changed in your trade this month, and what to do about it.

One email a month, and only one. We write a separate issue for every trade we recruit in, so you get yours - not a round-up with your trade buried in paragraph nine. Every issue is written for the person actually doing the hiring.

  • Where wages moved in your trade, by market, and what that does to your next offer
  • How long roles like yours are taking to fill, and where it is getting worse
  • Interview and screening tactics that are landing candidates this month
  • What contractors competing for the same people are doing differently

Built on federal wage data, our own closed searches, and what we hear on the desk every week. Written for employers, not candidates. No pitch, no filler, one click to leave.

Pick your trade. That is the one issue you get, once a month.

One email a month. Your trade and your address, nothing else - we do not sell either, and you can unsubscribe from the bottom of any issue. Read this month's issue for your trade first →