HVAC Service Manager Job Description
HVAC & Mechanical
Runs the service department day to day: dispatch and scheduling, technician utilization, callback rate, maintenance agreement renewals, and the gross margin on service and agreement work. The role mixes operations with account management — it keeps technicians billable and customers renewing — and it owns the number most mechanical contractors live on. It also owns technician development, truck and inventory discipline, and the handoff between service and installation.
What this seat pays
My Trade Talent mid-experience band, built from our own engagement history. Experience and region move it; the salary calculator applies both.
Pay, location and the date prepared are blank in the Word version on purpose. They depend on your market and your margins, and a template that guesses at them is worse than one that leaves them to you. The figure above is here so the guess is at least anchored.
The seat
| Reports to | General Manager |
| Direct reports | Dispatcher, service coordinator and 8 to 25 service technicians |
| FLSA status | Typically exempt — confirm with counsel |
| Trade | HVAC & Mechanical |
| Pay band | $85,000 to $120,000 — My Trade Talent band |
Where the role goes next. Service managers move to operations manager or general manager, and in smaller contractors to owner.
Essential duties (15)
- Run daily dispatch so the right technician with the right skill and the right parts gets to each call, and so emergency work does not destroy the planned maintenance schedule.
- Hold technician utilization at the target billable percentage and review the unbilled hours line every week to find where it leaked.
- Price and quote service repairs and small projects, review technician-generated quotes before they go out, and follow up on open quotes until they are won or dead.
- Own service and maintenance agreement gross margin, review the monthly job cost report line by line, and correct pricing or labor rates that are not holding.
- Sell, renew and escalate maintenance agreements, work the renewal date list, and get in front of the customer before the anniversary rather than after it.
- Investigate every callback, determine whether it was a parts, diagnosis or workmanship failure, and either coach the technician or change the process.
- Build the planned maintenance schedule so it spreads across the year instead of stacking into two months, and verify that tasking sheets are completed rather than initialed.
- Review and approve technician time, overtime and on-call pay before payroll, and challenge hours that do not match the work order narrative.
- Hire, onboard and develop technicians, run ride-alongs, document performance conversations, and manage out the technicians who will not meet the standard.
- Manage the on-call rotation and after-hours response so the customer reaches a live person and gets a committed arrival time.
- Manage truck inventory, stock levels, tool assignments and purchase order discipline, and chase down parts that are bought and never installed.
- Handle escalated customer complaints personally, including credits and no-charge return visits, and record the resolution and the underlying cause.
- Review open work orders and unbilled work weekly so invoices go out inside the billing cycle instead of aging into a dispute.
- Coordinate with project managers and the install department on warranty work, equipment start-ups and projects that service quoted and install will deliver.
- Report department results — revenue, margin, utilization, callback rate, agreement count and renewal rate — to ownership on a fixed monthly cadence.
Qualifications
- Five or more years in commercial HVAC, including time as a service technician, plus two or more years supervising technicians or dispatch.
- Able to price service repairs and agreements and explain a job cost report, not just read one.
- Working knowledge of commercial equipment — chillers, rooftop units, VRF, boilers and controls — deep enough to judge a technician's diagnosis over the phone.
- Experience with a service dispatch and work order system such as ServiceTitan, BuildOps, Davisware or an ERP service module.
- EPA Section 608 Universal certification.
- Valid driver's license and an insurable driving record.
- Able to walk jobsites and roofs, climb ladders and enter mechanical rooms to investigate a problem or back up a technician.
- Willing to be reachable after hours during escalations and heat or freeze events.
- Experience carrying a service department profit and loss statement at a mechanical contractor of comparable size.
- State mechanical or HVAC contractor license, or qualification to hold one.
- Experience selling and renewing a book of maintenance agreements managed by renewal date.
- Depth in one specialty — chillers, boilers or controls.
- Experience hiring in a tight labor market and running an apprenticeship pipeline.
- Comfort with reporting tools: dashboards, pivot tables or a business intelligence view of utilization and margin.
- NATE or manufacturer service certifications.
The line between these two columns is the one that costs you candidates. Everything in the preferred column that gets written into a posting as a requirement removes people who could do the job, and in a trade with a shortage that is a self-inflicted wound.
Credentials, and who verifies them
| Credential | Status | Verify with |
|---|---|---|
| EPA Section 608 Universal | Required | Certifying organization card |
| State mechanical or HVAC contractor or master license | Where the state requires it | State licensing board lookup with renewal dates tracked |
| OSHA 30 construction | Preferred | Training provider card and DOL card number |
| Manufacturer service training on the equipment lines the company carries | Preferred | Manufacturer training records |
| Valid driver's license | Required | Motor vehicle record run through the company insurer |
Verify before an offer rather than after. A credential taken on trust at offer is the most expensive line on this page. We track HVAC & mechanical licensing in 38 states; which of them applies depends on where the work is, not where the company is.
Physical demands
| Activity | Frequency |
|---|---|
| Sitting at a desk working dispatch, pricing and reports | Constant (over 2/3 of shift) |
| Talking by phone and video with customers and technicians | Constant (over 2/3 of shift) |
| Reading drawings, invoices and reports on screen | Constant (over 2/3 of shift) |
| Working extended or after-hours shifts during peak season and escalations | Frequent (1/3 to 2/3 of shift) |
| Walking jobsites, mechanical rooms and customer facilities | Occasional (under 1/3 of shift) |
| Climbing ladders and roof hatches to look at equipment with a technician | Occasional (under 1/3 of shift) |
| Driving to customer sites and between branches | Occasional (under 1/3 of shift) |
| Lifting and carrying up to 25 pounds of parts, files or samples | Occasional (under 1/3 of shift) |
| Standing for shop meetings, toolbox talks and ride-along coaching | Occasional (under 1/3 of shift) |
| Exposure to rooftop heat, cold and mechanical room noise | Occasional (under 1/3 of shift) |
| Lifting over 50 pounds or performing hands-on repair work | Rarely |
This is the section a reasonable accommodation decision actually turns on, which is why it is role specific rather than copied across a trade. An estimator sits and walks sites; a screed operator stands beside hot asphalt all day.
Work environment
Mostly an office or branch desk with a phone, a dispatch board and a job cost report, interrupted by customer sites. Site visits put the manager on roofs, in mechanical rooms and in occupied tenant spaces, with the same heat, cold, noise and fall exposure the technicians face, so full PPE is required there. Peak cooling season, heat waves and freeze events bring long days and after-hours calls. Travel is local and by company vehicle.
Tools and equipment
The company provides a laptop, phone, vehicle or vehicle allowance, access to the dispatch and accounting systems, and PPE including hard hat, glasses, vest and gloves for site visits. The manager is expected to own steel toe boots and clothing suitable for both a customer's conference room and a mechanical room.
How performance is measured
| Measure | What it captures |
|---|---|
| Service department gross margin by revenue type | Whether demand service, agreements and quoted repairs each hold their target margin |
| Technician billable utilization | Billable hours as a share of paid hours, by technician and for the department |
| Callback rate | Return visits on the same equipment inside 30 days as a share of completed calls |
| Maintenance agreement renewal rate and net agreement count | Whether the recurring base is growing, and who is leaving |
| Quoted repair conversion and quote aging | Share of quotes that convert and how long open quotes sit untouched |
| Unbilled work and days from completion to invoice | How long finished work sits before it becomes an invoice |
| Technician turnover and open seat days | Whether the department can staff the work it sells |
These are the same measures the annual review for this role is built on, so the document you hire against and the document you rate against are measuring one thing.
Reading a resume for this seat
What separates a strong HVAC Service Manager from a plausible one, on paper and in the first ten minutes of a call:
- Talks about utilisation, call-back rate and agreement renewal rate as numbers they owned
- Has grown a maintenance agreement base, not just serviced one
- Came up through the field - departments rarely accept a manager who cannot read a work order
Screen for it: 3 questions and what a strong answer contains
A job description tells you what you need. These tell you whether the person in front of you has it. Each one comes with what a strong answer contains, because an interviewer who does not know that is persuaded by fluency, which is exactly what the question was supposed to see past.
What was your technician utilisation, and what did you do that moved it?
What a strong answer containsGives a number and says how it was defined, because utilisation means different things in different shops. Then names a specific lever and what it was worth: a dispatch change, truck stock that cut return trips, better call screening, or planned maintenance used to fill the gaps. Improved efficiency with no number behind it is not an answer.
Follow up with: What was it before, and over what period did it move?
How do you decide which maintenance agreements to let go at renewal?
What a strong answer containsMargin per agreement rather than revenue, travel time and route density, equipment condition driving unplanned work you cannot bill, payment behaviour and site access, and whether the account feeds project work. Says they raise the price first and let the customer decide rather than walking away from something that was only mispriced.
Follow up with: Tell me about one you let go, and what it cost you to keep it the year before.
A technician has a second call-back on the same unit. What happens next in your department?
What a strong answer containsBreaks the loop. Somebody different goes, more senior, and reads the full history before they leave the shop. The visit is reviewed first rather than just dispatched. Root cause gets written down, and the customer hears from the department before they ring in again. Sending the same technician for a third look is the answer to avoid.
Follow up with: Who makes the call on who goes, and how quickly?
The mistake this seat invites
Promoting the best technician into the seat. Field strength does not predict dispatch discipline, and the department loses its best diagnostician in the process.
How long this takes to fill
My Trade Talent's median HVAC & mechanical hire took 15 days across 36 searches closed in 2026 year to date, counted as calendar days from our first contact with the candidate to the hire.
Worth writing on the requisition before you post it. The cost of the vacancy runs from the day the seat empties, not from the day you start looking, and the calculator will put a number on it for your billing rate.
Questions employers ask about this role
What does an HVAC Service Manager do?
Runs the service department day to day: dispatch and scheduling, technician utilization, callback rate, maintenance agreement renewals, and the gross margin on service and agreement work. The role mixes operations with account management — it keeps technicians billable and customers renewing — and it owns the number most mechanical contractors live on. It also owns technician development, truck and inventory discipline, and the handoff between service and installation. The full description below lists 15 essential duties in trade terms, with physical demands and frequencies.
What qualifications does an HVAC Service Manager need?
8 requirements are written as non-negotiable for this seat. The first 3: Five or more years in commercial HVAC, including time as a service technician, plus two or more years supervising technicians or dispatch; Able to price service repairs and agreements and explain a job cost report, not just read one; Working knowledge of commercial equipment — chillers, rooftop units, VRF, boilers and controls — deep enough to judge a technician's diagnosis over the phone. A further 7 qualifications are preferred rather than required, which is the distinction that decides whether a good candidate gets screened out by your own posting.
What credentials should I verify before making an offer to an HVAC Service Manager?
3 credentials on this role are either required outright or required where the state requires it: EPA Section 608 Universal, State mechanical or HVAC contractor or master license and Valid driver's license. Each one has a named place to verify it in the table below. Verify before the offer rather than after; a credential taken on trust at offer is the most expensive line in a job description.
Is an HVAC Service Manager exempt or non-exempt?
Typically exempt — confirm with counsel. FLSA status turns on the duties actually performed rather than the job title, and the duties for this seat are listed below so a classification decision has something to rest on. We are not lawyers and the note here is a starting point for counsel, not a determination.
What should an HVAC Service Manager be paid?
$85,000 to $120,000. My Trade Talent mid-experience band, built from our own engagement history. Experience and region move it; the salary calculator applies both.
How long does it take to hire an HVAC Service Manager?
My Trade Talent's median HVAC & mechanical hire took 15 days across 36 searches closed in 2026 year to date, counted as calendar days from our first contact with the candidate to the hire.
What is the most common hiring mistake in this seat?
Promoting the best technician into the seat. Field strength does not predict dispatch discipline, and the department loses its best diagnostician in the process.
One time
Where should we send it?
Tell us who you are once and every document on this site downloads for you from then on, with no form in the way. We are a recruiting firm: someone may call about the roles you are hiring for.